# Default config for sway
#
# Copy this to ~/.config/sway/config and edit it to your liking.
#
# Read `man 5 sway` for a complete reference.

### Variables
#
# Logo key. Use Mod1 for Alt.
set $mod Mod4
# Home row direction keys, like vim
set $left h
set $down j
set $up k
set $right l

set $term wterm

bindsym $mod+d exec --no-startup-id "rofi -show drun -run-shell-command '{terminal} -e \\" {cmd}; read -n 1 -s\\"'"
bindsym $mod+w exec --no-startup-id "rofi -show window -run-shell-command '{terminal} -e \\" {cmd}; read -n 1 -s\\"'"

exec dbus-daemon --session --address=unix:path=$XDG_RUNTIME_DIR/bus
exec mako

# exec swayidle -w \
#          timeout 300 'swaylock -f -c 000000' \
#          timeout 600 'swaymsg "output * dpms off"' \
#               resume 'swaymsg "output * dpms on"' \
#          before-sleep 'swaylock -f -c 000000'

### Key bindings
#
# Basics:
#
    # Start a terminal
    bindsym $mod+Return exec $term
    bindsym $mod+c exec $term
    

    # Kill focused window
    bindsym $mod+q kill


    # Drag floating windows by holding down $mod and left mouse button.
    # Resize them with right mouse button + $mod.
    # Despite the name, also works for non-floating windows.
    # Change normal to inverse to use left mouse button for resizing and right
    # mouse button for dragging.
    floating_modifier $mod normal

    # Reload the configuration file
    bindsym $mod+Shift+c reload

    # Exit sway (logs you out of your Wayland session)
    bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -b 'Yes, exit sway' 'swaymsg exit'
#
# Moving around:
#
    # Move your focus around
    bindsym $mod+$left focus left
    bindsym $mod+$down focus down
    bindsym $mod+$up focus up
    bindsym $mod+$right focus right
    # Or use $mod+[up|down|left|right]
    bindsym $mod+Left focus left
    bindsym $mod+Down focus down
    bindsym $mod+Up focus up
    bindsym $mod+Right focus right

    # Move the focused window with the same, but add Shift
    bindsym $mod+Shift+$left move left
    bindsym $mod+Shift+$down move down
    bindsym $mod+Shift+$up move up
    bindsym $mod+Shift+$right move right
    # Ditto, with arrow keys
    bindsym $mod+Shift+Left move left
    bindsym $mod+Shift+Down move down
    bindsym $mod+Shift+Up move up
    bindsym $mod+Shift+Right move right
#
# Workspaces:
#
    # Switch to workspace
    bindsym $mod+1 workspace 1
    bindsym $mod+2 workspace 2
    bindsym $mod+3 workspace 3
    bindsym $mod+4 workspace 4
    bindsym $mod+5 workspace 5
    bindsym $mod+6 workspace 6
    bindsym $mod+7 workspace 7
    bindsym $mod+8 workspace 8
    bindsym $mod+9 workspace 9
    bindsym $mod+0 workspace 10
    # Move focused container to workspace
    bindsym $mod+Shift+1 move container to workspace 1
    bindsym $mod+Shift+2 move container to workspace 2
    bindsym $mod+Shift+3 move container to workspace 3
    bindsym $mod+Shift+4 move container to workspace 4
    bindsym $mod+Shift+5 move container to workspace 5
    bindsym $mod+Shift+6 move container to workspace 6
    bindsym $mod+Shift+7 move container to workspace 7
    bindsym $mod+Shift+8 move container to workspace 8
    bindsym $mod+Shift+9 move container to workspace 9
    bindsym $mod+Shift+0 move container to workspace 10
    # Note: workspaces can have any name you want, not just numbers.
    # We just use 1-10 as the default.
#
# Layout stuff:
#
    # You can "split" the current object of your focus with
    # $mod+b or $mod+v, for horizontal and vertical splits
    # respectively.
    bindsym $mod+b splith
    bindsym $mod+v splitv

    # Switch the current container between different layout styles
    bindsym $mod+s layout stacking
    #bindsym $mod+w layout tabbed

    # Make the current focus fullscreen
    bindsym $mod+f fullscreen

    # Toggle the current focus between tiling and floating mode
    bindsym $mod+Shift+space floating toggle

    # Swap focus between the tiling area and the floating area
    bindsym $mod+space focus mode_toggle

    # Move focus to the parent container
    bindsym $mod+a focus parent
#
# Scratchpad:
#
    # Sway has a "scratchpad", which is a bag of holding for windows.
    # You can send windows there and get them back later.

    # Move the currently focused window to the scratchpad
    bindsym $mod+Shift+minus move scratchpad

    # Show the next scratchpad window or hide the focused scratchpad window.
    # If there are multiple scratchpad windows, this command cycles through them.
    bindsym $mod+minus scratchpad show
#
# Resizing containers:
#
mode "resize" {
    # left will shrink the containers width
    # right will grow the containers width
    # up will shrink the containers height
    # down will grow the containers height
    bindsym $left resize shrink width 10px
    bindsym $down resize grow height 10px
    bindsym $up resize shrink height 10px
    bindsym $right resize grow width 10px

    # Ditto, with arrow keys
    bindsym Left resize shrink width 10px
    bindsym Down resize grow height 10px
    bindsym Up resize shrink height 10px
    bindsym Right resize grow width 10px

    # Return to default mode
    bindsym Return mode "default"
    bindsym Escape mode "default"
}
bindsym $mod+r mode "resize"

# Volume control
bindsym XF86AudioRaiseVolume exec amixer -q sset Master 5%+ 
bindsym XF86AudioLowerVolume exec amixer -q sset Master 5%-
bindsym XF86AudioMute exec amixer -q sset Master toggle

bar {
    position top
    
    #status_command SCRIPT_DIR=~/.config/i3blocks/ i3blocks
    
    strip_workspace_name yes

    #tray_output primary

    colors {
        statusline #cccccc
        background #333333
	focused_workspace #333333 #aeafad #333333
        inactive_workspace #333333 #333333 #cccccc
	urgent_workspace #333333 #f2777a #2d2d2d
    }
}


input type:keyboard {
    xkb_layout us,ru
    xkb_options grp:win_space_toggle,caps:ctrl_modifier#,ctrl:nocaps
}

# Change borders
default_border none
default_floating_border normal
hide_edge_borders vertical

gaps inner 1

workspace_auto_back_and_forth on
focus_on_window_activation focus
focus_wrapping workspace

# Default stumpwm keybinding doesn't work, because C-t is used by many programs
# and sway let other programs to use binded keys.
set $StumpMod Control+t 

assign [class="Emacs"] "Editor"
assign [class="Icecat"] "Browser"
assign [class="Firefox"] "Browser"
assign [class="Chromium"] "Browser"

mode "stumpwm" {
     # Would be nice to have exit from mode after each bind

     bindsym --to-code {
     	 # Launch emacs
	 e exec emacsclient; workspace "Editor"; mode default;
	 
    	 shift+e exec "if ps auxf | grep -c emacs > 1; then swaymsg '[class=Emacs] focus'; else swaymsg exec 'emacs'; fi; swaymsg 'mode default'";
	 
	 # Launch terminal
	 c mode default; exec $term;

	 # Kill window
	 k kill; mode default;

    	 # Navigation
	 n workspace next; mode default;
	 p workspace prev; mode default;

	 # Switch to previous workspace
	 t workspace current; mode default;
	 Control+t workspace current; mode default;

	 # Splitting
	 s split vertical; mode default;
	 Shift+s split horizontal; mode default;

	 # Exit stumpwmm mode
	 g mode default;
	 
	 Control+g mode default;

         # Select workspace with corresponding digit
	 0 workspace "0: Emacs"; mode default;
	 1 workspace 1; mode default;
	 2 workspace 2; mode default;
	 3 workspace 3; mode default;
	 4 workspace 4; mode default;
	 5 workspace 5; mode default;
	 6 workspace 6; mode default;
	 7 workspace 7; mode default;
	 8 workspace 8; mode default;
	 9 workspace 9; mode default;

	 # Choose/find window
	 apostrophe exec --no-startup-id "swaymsg mode default; rofi -show window"

	 # Combimode
	 b exec --no-startup-id "swaymsg mode default; rofi -show combi"
	 

	 # Exec/find shell command
	 shift+1 exec --no-startup-id "swaymsg mode default; rofi -show run -run-shell-command '{terminal} -e \\" {cmd}; read -n 1 -s\\"'"
     }

    # bindsym --to-code n exec "swaymsg focus down; swaymsg mode default;"
    # bindsym --to-code p exec "swaymsg focus up; swaymsg mode default;"
    # bindsym --to-code b exec "swaymsg focus left; swaymsg mode default;"
    # bindsym --to-code f exec "swaymsg focus right; swaymsg mode default;"

    # List of windows
    bindsym w exec --no-startup-id "swaymsg mode default; rofi -show window -run-shell-command '{terminal} -e \\" {cmd}; read -n 1 -s\\"'"
}
bindsym --to-code $StumpMod mode "stumpwm"

bindsym --to-code $mod+n exec --no-startup-id "rofi -show window"

bindsym $mod+g mode "default"